PRODUCT DETAILS
Description
The M5GO IoT Starter Kit v2.7 is a cost effective IoT starter development kit. The kit contains Core Controller M5GO + 6 expansion units with different functions (sensors/actuators/splitters). The core controller M5GO adopts Espressif ESP32 chip, equipped with 2 low-power Xtensa® 32-bit LX6 microprocessors, with a main frequency of 240MHz. With 16M FLASH memory for larger program size. Besides its powerful , the MCU also supports Wi-Fi, which can be used to build smart wearable devices, smart home and other applications.
Product Features
Based on ESP32 development
16M FLASH
Integrated HD IPS display panel with various hardware peripherals
Rich resources interface, compatible with M5Stack stacking modules and sensors, Strong expandability
The base is compatible with 8mm size LEGO blocks, the structures just so interesting!
Microsoft Azure authentication device
Compatible with multi-platform development:
M5GO IoT controller
Low code development:
Supports UIFlow graphical programming platform, scripting-free, cloud push
Fully compatible with Arduino, ESP32-IDF and other mainstream development platforms
FreeRTOS support, with dual-core and multitasking mechanism, it can perform the tasks efficiently, Program optimization.
High integration.
2.0-inch IPS display panel, 6-axis IMU, programmable RGB lights x10, microphone, speaker, custom buttons x3
Built-in Li-ion power supply, integrated power management chip, supports TypeC interface and POGO PIN interface power supply
Finely tuned RF circuitry for stable and reliable wireless communication
Strong expandability.
GROVE expansion ports x3 (I2C, GPIO, UART)
Easy access to M5Stack hardware and software system, stackable module design, plug-and-play sensor expansion
6x expansion units
ENV UNIT III: Temperature, humidity, and atmospheric pressure sensors, with I2C communication interface for rapid acquisition of environmental information.
PIR UNIT: Body sensor, passive pyroelectric for human body sensing, digital signal output status.
ANGLE UNIT: Knob Potentiometer, analog signal input for music/lighting adjustment
IR UNIT: Integrated infrared transmitter, receiver. Free coding, infrared transceiver.
RGB UNIT: 3x Programmable RGB LED, support programming to control any color display
HUB UNIT: I2C device splitter, expand single I2C bus to 3 channels, can access different I2C address devices
Switch on/off operation:
Power on: Click the left red button
Power off: Quick double click the left red button
USB power: By default, It can not be shutdown when USB power is on.
Included
1x M5GO
6x Units(ENV III, IR, RGB, PIR, ANGLE, HUB)
4x LEGO Blocks
12x LEGO Connections
4x GROVE cable
1x Type-C USB (20cm)
1x Quick Start Guide
Applications
STEM Education
IoT Controller
Smart Home
Smart Weather Station
Specifications

Specifications
Parameters
ESP32-D0WDQ6-V3
240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi
Flash
16MB
Input Voltage
5V @ 500mA
Host Interface
TypeC x1, POGO PIN x1, I2C x1, GPIO x1, UART x1
IPS Screen
2 inch, 320x240 Colorful TFT LCD, ILI9342C, 853nit max brightness
Keys
Custom Keys x 3
Speaker
1W-0928
Microphone
Analog BSE3729 Microphone
IMU
6-axis MPU6886
USB Chip
CH9102F
LED
SK6812 RGB LED x 10
Antenna
2.4G 3D antenna
Battery
500 mAh @ 3.7V
Operating Temperature
0°C to 40°C
Net Weight
56.4g
Gross Weight
228g
Product Dimensions
54 x 54 x 21 mm
Package Size
147 x 90 x 40 mm
Cover Material
Plastic ( PC )
LEARN AND DOCUMENTS
 
This tutorial will show you how to control M5GO devices through the UIFlow graphical programming platform
 
This tutorial will show you how to program and control M5GO devices through Arduino IDE
 
This tutorial will show you how to control M5GO devices through Micropython programming
 
I used mqtt to control the switching of the scene of OBS moving on PC from other devices.
 
M5Stack recently released an updated LoRaWAN module. This tutorial teaches you how to connect it to The Things Network using Arduino IDE.
 
Control two servos using only one grove port on M5Stack products.
 
Out of the M5Stack family only the M5StickC has an inbuilt RTC. Here's how to add one to your other M5Stack devices
 
A DIY project conduct with a thermal printer and M5Camera.
 
A inner maker competition of M5Stack.
 
This report is a technical report of an example of Internet of things detector for domestic water meter. Copyright belongs to the author