Description
BASIC is a cost-effective entry-level IoT main controller. It adopts Espressif ESP32 chipset, equipped with 2 low-power Xtensa® 32-bit LX6 microprocessors with main frequency up to 240MHz. Built-in 16M FLASH memory, integrated 2.0-inch full-color HD IPS display panel, speaker, TFCard slot and other peripherals. The full-coverage housing ensures circuit stability even in complex industrial applications. Internal provides a variety interface resources (ADC/DAC/I2C/UART/SPI, etc.) and 15x IO pins at the bottom, which is highly developable. Ideal for a variety of product prototyping, industrial control, intelligent building application.
High productization:
Exquisite designs, Prototyping right into products
Product-grade full-coverage cover for more stable circuit operation
Low Code Development:
Support UIFlow graphical programming platform, scripting-free, cloud push
Fully compatible with mainstream development platforms such as Arduino and ESP32-IDF
Support FreeRTOS, with dual-core and multitasking mechanism, it can perform the tasks efficiently, Program optimization.
High Integration:
2.0 inch IPS display panel, speakers, custom buttons x3
Built-in lithium battery power, integrated power management chip, support TypeC interface
Finely tuned RF circuit for stable and reliable wireless communication
Strong Expandability:
15x IO leads
Easy access to M5Stack's hardware and software ecology system, stackable module design, plug-and-play rich sensors expansion
Power on/off operation:
Power on: Click the red power button on the left
Shutdown: Quickly double-click the red power button on the left
*USB power supply *: By default, when USB is powered, it cannot be shut down
Product Features
Based on ESP32 development
16M FLASH
Integrated full-color high-definition IPS display panel and a variety of hardware peripherals
Rich resources interface, compatible with M5Stack stacking modules and sensors, highly expandable.
Use built-in lithium battery, 15x IO leads.
Compatible with multi-platform development:
Included
1x BASIC
10x Dupont line
1x Type-C USB(20cm)
1x manual
1x sticker
Application
IoT Controller
DIY creator works
Smart home control
Specifications

Specifications
Parameters
ESP32-D0WDQ6-V3
240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi
Flash
16MB
Input power
5V @ 500mA
Interface
TypeC x1, I2C x1
IO
G21, G22, G23, G19, G18, G3, G1, G16, G17, G2, G5, G25, G26, G35, G36
Button
Physical button x 3
LCD screen
2.0"@320*240 ILI9342C IPS panel, maximum brightness 853nit
Speaker
1W-0928
USB chip
CH9102F
Antenna
2.4G 3D Antenna
Battery
110mAh @ 3.7V
Net weight
47.2g
Gross weight
93g
Product size
54mm x 54mm x 18mm
Packing size
95 x 65 x 25mm
Cover Material
Plastic ( PC )

Comparison of old and new versions
Driver Installation
Click the link below to download the driver that matches the operating system. There are currently two driver chip versions, CP210X (for CP2104 version)/CP34X (for CH9102 version) driver compressed package. After decompressing the compressed package, select the installation package corresponding to the number of operating systems to install. (If you are not sure of the USB chip used by your device, you can install both drivers at the same time. During the installation process of CH9102_VCP_SER_MacOS v1.7, an error may occur, but the installation is actually completed, just ignore it.) When using it, if If the program cannot be downloaded normally (the prompt is overtime or Failed to write to target RAM), you can try to reinstall the device driver.
Driver name
Applicable driver chip
Download link
CP210x_VCP_Windows
CP2104
CP210x_VCP_MacOS
CP2104
CP210x_VCP_Linux
CP2104
CH9102_VCP_SER_Windows
CH9102
CH9102_VCP_SER_MacOS v1.7
CH9102